Parts and Accessories Info
Everything you'll need to complete your System! - As your authorized Northeast Wisconsin and greater Green Bay Central Boiler dealer, we carry a complete selection of parts and accessories to simplify the installation and maintenance of your system. Below you can download Central Boiler's parts and accessories catalog and system diagrams and illustrations.

Contact Bill Lohrey for all of your parts, pricing or technical information!
Parts and Accessories Catalog - To view/download a Central Boiler Parts and Accessories Catalog (26 page catalog (3.9 MB), PDF format.) click here
Central Boiler System Diagrams - To view/download a Central Boiler System Diagrams (13 page document (7.1 MB), PDF format) click here.


Furnance Accessory
In Floor Heating - One of the big advantages of your Central Boiler Furnace is its ability to be hooked up to your in-floor heating. We can install in-floor heating anywhere from basements, to garages and shops. We can even install under your sub-floor to create a warm floor upstairs.
  • 1/2 Pex Tubing
  • 3-Way Zone Valve - 3/4"
  • 2-Way Zone Valve - 3/4"
  • Transformer
  • Mixing Valve (With Temperature Guage)
  • 007 Zone Pump
  • Flange Kit
  • Manifolds with Valves
Thermostats -
  • 110 Volt
  • 110 Volt Plug-in
  • Low Voltage
  • Fan Center (needed to use low volt T-Stat on shop heaters)
Water to Water Heat Exchangers (316L SS Copper Brazed): - Water to Water heat exchangers are commonly utilized when installing to an existing boiler system, or anywhere we need to keep the water from your Central Boiler separate from the indoor system.

Shell and Tube heat exchangers are typically used on residential and high demand water heaters. If wanted, we can even set up your water heater to have endless hot water.

*Please note: An anti-scald valve will also need to be installed on the water heater to control the temperature of water going to the faucets.
  • 30 Plate (Boilers Up To 100K BTU)
  • 50 Plate (Boilers 100K - 175K BTU)
  • 70 Plate (Boilers 175K - 250K BTU)
  • 27" Shell & Tube (High Demand Water Heaters)
  • Mounting Bracket
Water to Water Heat Exchangers (Marine Grade - Nickel Brazed): - Many customers throughout Northeast Wisconsin are heating their swimming pools and hot tubs with Central Boiler Furnaces, and enjoying added months of swimming. Marine grade heat exchangers are used to offset the corrosive qualities inherent in chlorinated pool water.
  • 10 Plate (Hot Tubs & up to 12K Gal.)
  • 16 Plate (Up to 25K Gal.)
  • 20 Plate (Up to 30K Gal.)
  • 24 Plate (Up to 36K Gal.)
Water-To-Air Heat Exchanger - Water to Air heat exchangers are used to convert the hot water from your Central Boiler Furnace to forced air heat. We carry many different sizes, so you can sure be we'll have one to fit your furnace.
  • 50,000 BTU (12 3/4" x 14")
  • 80,000 BTU (12 3/4" x 18")
  • 95,000 BTU (15" x 20")
  • 100,000 BTU (16 1/2" x 19")
  • 125,000 BTU (17 3/4" x 20")
  • 140,000 BTU (19" x 21")
  • 185,000 BTU (22 3/4" x 24")
  • 220,000 BTU (24" x 26")


Heaters
Shop Heaters with Bladed Fan (w/ louvers) - We carry multiple sizes of forced air heaters to handle anything from the smallest garages, to the largest of shops and commercial buildings
  • 100,000 BTU (19" x 16 1/2" x 16")
  • 220,000 BTU (26" x 24" x 20")
Shop Heaters with Squirrel Cage Fan (w/ louvers) -
  • 50,000 BTU (16" x 20" x 13" 1/15 HP Fan)
  • 100,000 BTU (36" x 20" x 23" 1/4 HP Fan)
  • 125,000 BTU (36" x 20" x 23" 1/4 HP Fan)
  • 140,000 BTU (36" x 20" x 23" 1/4 HP Fan)
  • 185,000 BTU (39" x 25" x 23" 1 HP Fan)
  • 220,000 BTU (39" x 25" x 23" 1 HP Fan)
Shop Heaters without Cabinet -
  • 100,000 BTU (19" x 21" x 33")
  • 140,000 BTU (19" x 21" x 33")


Insulated Piping
Thermo-Pex Piping - Thermo-Pex is flexible pre-insulated piping that's ideal for your Central Boiler Furnace. Thermo-Pex consists of two 1" lines, or two 1¼" lines conveniently marked to designate supply and return. Unlike "wrapped" piping, Thermo-Pex is insulated with high density urethane insulation with a thick, waterproof outer jacket.


Miscellaneous Accessories
Miscellaneous Accessories - There will be a multitude of "smaller" items needed to complete your Central Boiler installation. Things like piping, valves, fittings, drains, thermostats, chemicals, and more. But don't worry about the small stuff, we'll go over your personalized item list on our site visit, or over the phone.
Domestic Hot Water Kit (Fits Most Water Heaters) -
  • Tempering Valve (Anti-Scald Valve)
  • High Temperature Filter
  • 1" Pex (Class A)
  • 1" Thermo-Pex
  • 1 1/4" Thermo-Pex
  • Corrosion Inhibitor (1 Gallon)
  • Ashtrol (Firebox PH Modifier)


Pumps
Pumps - One sized pump installation is not appropriate for all installations. Pumps need to be sized accordingly, taking into account length of run, tubing size, and the BTU load of the building being heated. At Renewable Energies, LLC we'll make sure everything in your system is sized correctly to get the most efficiency out of your Central Boiler Furnace.
  • 007 Taco Pump
  • 00R 3 Speed Taco Pump
  • 009 Taco Pump
  • 014 Taco Pump
  • Valved Flange Kit - 3/4"
  • Valved Flange Kit - 1 1/4"